OFFER#

TANK AMMO 105MM

TYPE:	Ammunition
DESCRIPTION:	105mm HEAT
PRICE:	Upon Request
PACKING:	Upon Request

TANK AMMO 105MM

From new manufacture

Subject unsold or market withrawal

105mm HEAT-MP-T

Description

For use with 105mm US M68, UK L7, CN105F1and other Stanag 4458 compliant tank guns,to defeat armoured targets and structures by means of its shaped charge effect and personnel with blast and fragmentationeffect.

The steel bodied projectile is fitted with apolymer obturating band, a stand-off spikeassembly, a tail fin assembly, and a tracer. Itis equipped with a dual safety Point ImpactBase Detonating (PIBD) fuze, which complieswith Mil-Std-1316. It has a high explosive shaped charge with a copper liner. The projectile isassembled to a brass cartridge case which is filled with triple base propellant and fitted with anelectric primer. This round is based on the US 105mm M456 series and is similar in appearanceand ballistically.

PACKAGING
Two (2) rounds per twin container 12 containers per pallet
UN Classification: 1.1 E UN 0006

Status

in service and production

Technical Data Specification

Type

Fixed round HEAT-MP-T

Calibre

105mm

Round mass (nominal)

22.2kg

Round length

992mm

Projectile mass (nominal)

10.5kg

Projectile filling (Comp B)

1.1kg

Fuze

PIBD

Tracer

M13

Cartridge case

Brass

Anti-wear additive

Titanium dioxide

Primer

Electric cap M83

Propellant TB (nominal)

5.3kg

Muzzle velocity (at 21°) (nominal)

1,173m/s

Dispersion

0.3 Mils

Maximum range

8,200m

Penetration (at operational ranges)

>NATO Single Heavy

Operational temperature

-32°C to +52°C

Specification and photos are not contractual and are subject to verification upon inspection

PLEASE BE ADVISED THAT INFORMATION INCLUDED IS CONFIDENTIAL IN NATURE AND IS BASED ON PRE-EXISTING BUSINESS RELATIONSHIP WITH THE LEGAL OWNER OF PROPERTY DESCRIBED HEREIN (IF APPLICABLE). AS SUCH, UPON RECEIPT OF SAID INFORMATION THE RECEIVER ACKNOWLEDGES THAT ANY UNAUTHORIZED CONTACT WITH SAID LEGAL SELLER WILL BE CHARACTERIZED AS A BREACH OF CONFIDENTIALITY AND SAID AGREEMENT MAY BE ENFORCED UNDER EXISTING LAW OR IN EQUITY.

This paper was prepared by General Equipment Inc.
The paper represents an offer of a partner of General Equipment Inc.
All rights are reserved by and for General Equipment Inc.
All content and ideas of this paper are the property of General Equipment Inc.

This transmission may include information on International Traffic in Arms Regulation (ITAR) (22 CFR-120-130) controlled items. These controlled items may not be resold, diverted, transferred or transshipped outside of the United States or to any other country without U.S. State Department approval.

GENERAL EQUIPMENT INC.